Table of Contents=

Logging on to Micropay Reports.........= ...........................................................................= ................... 1

How to Run a Report...............................= ...........................................................................= .............. 2

Reports..........................................= ...........................................................................= ........................ 4

Alpha Employee List............= ...........................................................................= ...................... 4

Alpha Time Sheet...............= ...........................................................................= ....................... 4

Deduction Report Summary.......= ...........................................................................= ............... 4

Employee Dates.................= ...........................................................................= ........................ 5

Employee Hired/Terminated......= ...........................................................................= ................ 5

Employee Report................= ...........................................................................= ....................... 5

Employee YTD Sick..............= ...........................................................................= ..................... 5

Employee YTD Vacation..........= ...........................................................................= .................. 5

History Earnings By Employee...= ...........................................................................= ................ 5

Quarterly Department Report....= ...........................................................................= ................ 6

Rates By Department............= ...........................................................................= ..................... 6

Sick-Vacation Report...........= ...........................................................................= ...................... 6

Unemployment Report............= ...........................................................................= ................... 6

Report Parameters Screen...............................= ...........................................................................= ..... 8

Report Selected................= ...........................................................................= ......................... 8

Employees......................= ...........................................................................= ........................... 8

Deductions.....................= ...........................................................................= ............................ 8

Pay Codes......................= ...........................................................................= ........................... 9

Departments....................= ...........................................................................= .......................... 9

Entering Dates.................= ...........................................................................= .......................... 9

Employee Dates.................= ...........................................................................= ............ 9

History Dates..................= ...........................................................................= ................ 9

Reports’ Toolbar...............................= ...........................................................................= ................... 10

Reports’ Toolbar Buttons:= ...........................................................................= ........................ 10

Export Screen..................= ...........................................................................= ............ 11

Exporting to a File............= .......................................................................... = 11

Exporting to E-mail............= ......................................................................... <= /span>12

Utilities Menu..........................................= ...........................................................................= ............. 13

Check Employee/YTD Gross.......= ...........................................................................= .............. 13

Quick Lists....................= ...........................................................................= ........................... 14

How to Build a Report..........= ...........................................................................= ........ 14

Special Cases..................= ...........................................................................= ........................ 17

Current Terminated Employees...= ...........................................................................= 17

Dropped Terminated Employees...= ......................................................................... <= /span>17

Index..........................................= ...........................................................................= ......................... 18

Logging on to Micropay Reports

Double click on the icon on your desktop or go to the Start menu, select Programs, then select the Micropay folder, highlight Micropay Reports and click the left mouse button. The logon screen will look the sam= e as the one for Micropay. Micropay Reports is accessed by the same User ID and Password used by Micropay and w= ill immediately display the Micropay Reports Selection screen (figure 1).

Figure 1

From this screen you select which report you want to r= un from the list of reports displayed here.&n= bsp; See the Reports section for details about the list of available repo= rts.

How to Run a Report<= !--[if supportFields]> XE "How to Run a Report"= ;

There are four steps involved in generating a report. =

1. = Choose a client

2. = Select a report type

3. = Select the report parameters

4. = Click “Print/Preview” to generate the report

These steps are illustrated in the “History Earn= ings by Employee” report example below.

1. Choose a c= lient: Most ComputerSearch clients have o= nly one payroll and therefore only one client is listed. If you have multiple payrolls then= you will see more than one client listed. Select the client for the report by clicking on the client name. The name will become highlighted.<= /p>

3D"Text =
2. Select a report: Only one report may be run at a time. Here we have chosen the “History Earnings by Employee” report. For more information on the report= s see the Reports section. Click the “Next” button to proceed to the Report Parameters Screen (figure 2). If you have selected the wrong report or client you may click the “Back” button on the Report Parameters Screen to return to the Report Selection screen.

3. Select Items to display:&nb= sp; On the Report Parameters screen, select the items to be displayed on= the report. The “History Ea= rnings by Employee” report allows the following parameters:

a) = Employees: defaults to “All Employees= 221;, a group of one or more specific employees may be displayed by selecting them from the list. All highlighted employees in the list will be displayed in t= he report. Clicking on an employee a second time will deselect them. A single employee may be selected by typing their employee number in the provided fi= eld.

b) = Pay Codes: defaults to “All Pay Codes.” One or more pay= codes may be select from the pay code list by clicking on the desired item. All highlighted items in the list will be displayed in the report. Clicking on a list item a second time will deselect it.

c) = Departments: defaults to “All Departments.” To display particular departments select them from the department list by clicking on them. A single department may be selected by typing its number in the provi= ded field.

d) = History Dates: defaults to the “Current Pay Period” date range. The History Date range uses either= the Week Ending Date or the Check Date. The default value used for the Date range is the Week Ending Date. You can change the date range para= meter to display last pay period, current month, current quarter, current year, or you can specify a date range.

For more information on the parameters see the Report Parameters section.

3D"Text =
4. Click the “Print/Preview&= #8221; button: This will generat= e a preview of the report with the specified parameters (figure 3). Clicking the “printer icon&#= 8221; button will bring up a print dialog box, where you can print out the entire report or a range of pages and the number of copies. Micropay Reports uses the default printer that is setup for Microsoft Windows; consult your Microsoft Windows manual for details on setting up a printer. When finished, click the “close” button to return to Micropay Reports Selection screen.<= span style=3D'mso-spacerun:yes'> Note: Each report is defined to print in either Portrait or Landscape mode and cannot be changed.

Reports

Micropay Reports has many built in, predefined reports= . The following gives a brief description of some of the more commonly used ones.=

Alpha Employee List XE "Alpha Employee List"= ;

This report generates an alphabetically sorted list of employees with the following information:

Employee Number, Employee Name, Department Number, Department Name, Terminated Date, and Date Hired. The last page of the report will indicate the total number of employees on this report.

Note: The data used in the Alpha Employee List is stor= ed in the MicroMaster. Therefore it= is essential to download the MicroMaster.

The Departments tab is available for this report.

Once the appropriate parameter has been selected, clic= k the “Print” button to display this report.

Alpha Time Sheet

This report displays information from the Micropay Time sheet. When a new payroll is = begun, this report will have no information. As each employee is paid, this report will display that information sorted in alphabetical order. The Alpha Time Sheet report displays the following information:

Week Ending Date, Reset MTD Totals, Check Date, Starti= ng Check Number. This informatio= n is taken from the Time sheet Header.

Line one: Employee Number, Employee Name, Home Departm= ent, Salary Rate, Hourly Rate, 2nd Rate, and 3rd Rate.

Line two: Pay Code, Description, Job Number, Hours, Ov= ertime Hours, Other1, Other2, Department Number, TempHourly, TempSalary, Frequency, Overtime, Deduction Number, Deduction Description, and Deduction Amount.

The report also displays the entered Run Date of the payroll, whether the payroll has been validated and if it has been transmitted.

No parameters are available for this report. Click the “Print” butt= on to display this report.

Deduction Report Summary<= /a>

This report will display the following information for= the deduction selected:

Employee Name, Employee Number, Social Security Number, Deduction Amount, YTD Amount, and Grand Total.

The YTD Amoun= t lists information for the current year only!&nbs= p; For example, if a 1999 date range is selected, the YTD Amount will o= nly list information from January 2000 to the current date.

Note: The information for the Deduction Report Summary= uses information stored in the MicroMaster and Payroll History files. Therefore it is essential to downl= oad these files.

All tabs are available for this report. Once the appropriate paramet= ers have been selected, click the “Print” button to display this report.

Employee Dates

This report will display Date Hired, Terminated, and B= irth Dates for each employee. Also= on the report are the Employee Name and Employee Number. This information is sorted alphabetically.

The Employees and Employee Dates tabs are available fo= r this report. Once the appropriate parameters have been selected, click the “Print” button to disp= lay this report.

Employee Hired/Terminated=

This report displays an employee’s Date Hired and Terminated date. The report a= lso contains the Employee Name, Employee Number, and Social Security Number of = the selected individual(s). This information is sorted alphabetically.

The Employees, Departments, and Employee Dates tabs are available for this report. On= ce the appropriate parameters have been selected, click the “Print” bu= tton to display this report.

Employee Report

This report gathers employee information from the Empl= oyee Information Screen in Micropay. The report displays information for the selected individual(s) from the following sections: General, Monetary, Deductions, Earnings, Accruals and Personnel.

Note: The information for the Employee Report uses information stored in the MicroMaster.&nbs= p; Therefore it is essential to download the MicroMaster.

The Employees and Departments tabs are available for t= his report. Once the appropriate parameters have been selected, click the “Print” button to disp= lay this report.

Employee YTD Sick

This report displays the Year-To-Date totals for Sick = Hours taken, the remaining Balance Hours, and Grand Totals for both. The report is sorted alphabeticall= y by name and also gives the employee number.

Note: The information for the Employee YTD Sick report= uses information stored in the MicroMaster.&nbs= p; Therefore it is essential to download the MicroMaster.

The Employees and Departments tabs are available for t= his report. Once the appropriate parameters have been selected, click the “Print” button to disp= lay this report.

Employee YTD Vacation=

This report displays the Year-To-Date totals for Vacat= ion Hours taken, the remaining Balance Hours, and Grand Totals for both. The report is sorted alphabeticall= y by name and also gives the employee number.

Note: The information for the Employee YTD Vacation re= port uses information stored in the MicroMaster. Therefore it is essential to downl= oad the MicroMaster.

The Employees and Departments tabs are available for t= his report. Once the appropriate parameters have been selected, click the “Print” button to disp= lay this report.

History Earnings By Employee

This report displays a History earnings report for each employee, plus a grand total for all employees. Each employee record contains: Emp= loyee Number, Employee Name, Employee Address, Social Security Number, Department Number, Birth Date, Date Hired, Date Terminated, Week Ending Date, Pay Type, Rate, Regular Hours, Over Time Hours, Regular Pay, Over Time Pay, Other1 Earnings, Other2 Earnings, Gross Pay, Social Security Taxes, Medicare Taxes, Federal Withholding, State Withholding, Disability Insurance, All Deduction= s, Net Pay, and Employee totals. The last page of the report displays the Grand Total for all employees.

Note: The information for the History Earnings By Empl= oyee report uses information stored in the Payroll History file. Therefore it is essential to downl= oad this file.

The Employees, Departments, and History Dates tabs are available for this report. On= ce the appropriate parameters have been selected, click the “Print” bu= tton to display this report.

Quarterly Department Report

This report displays the following department informat= ion: Charged Department Number, Charged Department Name (where available), Quart= er, Regular Hours, Over Time Hours, Vacation Hours, Other Hours, Regular Earnin= gs, Over Time Earnings, Vacation Earnings, Other Earnings, Other Earnings 5, Gr= oss Pay, FICA (Social Security Taxes & Medicare Taxes) Federal Taxes, State Taxes, Voluntary Deductions, and Net Pay.&= nbsp; Each department has a department total for each quarter and a grand total for all departments on the last page of the report.

Note: The information for the Quarterly Department rep= ort uses information stored in the Payroll History file. Therefore it is essential to downl= oad this file.

The Departments and History Dates tabs are available f= or this report. Once the appropr= iate parameters have been selected, click the “Print” button to disp= lay this report.

Rates By Department XE "Rates By Department"= ;

This report displays the employees’ rate of pay = listed by department. The report con= tains the Department Number, Department Name, Employee Number, Employee Name, Sal= ary Rate or Hourly Rate, Exception Rate, and Third Pay Rate.

Note: The information for the Rates By Department repo= rt uses information stored in the MicroMaster. Therefore it is essential to downl= oad the MicroMaster.

The Employees and Departments tabs are available for t= his report. Once the appropriate parameters have been selected, click the “Print” button to disp= lay this report.

Sick-Vacation Report<= !--[if supportFields]> XE "Sick-Vacation Report&quo= t;

This report displays employees Year-To-Date totals for= Sick Hours taken, Sick Pay, Balance of Sick Hours, Vacation Hours taken, Vacation Pay, Balance of Vacation Hours, and Grand Totals. The report is sorted by Employee N= umber.

Note: The information for the Rates By Department repo= rt uses information stored in the MicroMaster. Therefore it is essential to downl= oad the MicroMaster.

The Employees tab is available for this report. Once the appropriate parameters ha= ve been selected, click the “Print” button to display this report.=

Unemployment Report XE "Unemployment Report"= ;

This report displays information for Unemployment / Workers’ Comp Claim. The report contains the following employer information: Employer Address, Feder= al ID, and Employer Registration Number. Employee information displayed is as follows: Employee Number, Employee Name, Employee Address, Social Security Number, Date Hired, Date Terminated, Department Number, and Birth Date.

Payroll information the report contains: Week Ending D= ate, Pay Type, Sick Hours, Gross Pay, Gross Pay Less than $80, Employee Totals (= for Sick Hours, Gross Pay, Gross Pay Less than $80), Number of Pay Periods, and Average Earnings. This report= is sorted by employee number.

Note: The information for the Unemployment Report uses information stored in the Payroll History file. Therefore it is essential to downl= oad this file.

The Employees and History Dates tabs are available f= or this report. Once the appropr= iate parameters have been selected, click the “Print" button to displ= ay this report.

Report Par= ameters Screen

3D"Text =
The Report Parameters screen has six tabs (figure 4):

Not all of the tabs are available on every report. The available parameters depend on= which report has been selected.

Report Selected

The Report Parameters screen defaults to the Report Se= lected tab. This tab displays the Re= port you selected. If this is not = the correct report, click the “Back” button to select the appropria= te report.

Employees

The Employees tab allows you to perform the following = tasks:

· Display all employees (active, terminated, or both).

· Select one or many employees from the list. = All highlighted items in the list will be displayed in the report. Clicking on a list item a second time will deselect it.

· Sort the list by employee Number (Sort by Emp Number) or Employee Name (Sort by Emp Sort Code).

· Select a single employee by entering the Employee Number.

Deductions

The Deductions tab allows you to select a deduction fr= om a list of deductions. Only one deduction may be included on a report.

Pay Codes=

The Pay Codes tab allows you to select all, one, or se= veral pay codes from the pay code list by clicking on the desired item(s). All highlighted items in the list will be displayed in the report. Clicking on a list item a second time will deselect it.

Departments

The Departments tab allows you to set the following parameters for a report:

· Display all departments.

· Select one or many particular departments fr= om a list. All highlighted items in the list will be displayed in the report. Clicking on a list item a second time will deselect it.

· Enter a specific department number.

Entering Dates

The date tab allows you to use either employee related= dates (Hire, terminate, birth) or history dates (earnings history) as selection criteria. The Employee and History Dates parameters will allow you to speci= fy your own date range. You can = enter the dates manually in each field, use the calendar, or double click in each field to bring up a calendar.

The calendar has the current date highlighted by defau= lt. To select a range of dates click on one of your end dates (from or to) and hold the mouse button down while dragging the pointer to the other end date, then release the button. Alternati= vely you can double click in the “from” or “to” fields a= nd a calendar will pop up. Select = the desired date by clicking on it, and then click the “OK” button.=

Employee Dates

The Employee Dates tab allows you to set the following parameters for a report:

· Date Hired.

· Date Terminated.

· Date of Birth.

· All Dates (labeled “Don’t Select= Any Dates”).

· Date Range. A date range must be specified for= the following date parameters:

Note: Employee Dates are taken from the MicroMaster.

History Dates

The History Dates tab allows you to set the following parameters for a report:

· History date ranges using Week Ending Dates.=

· History date ranges using Check Dates.

· Dates Ranges:
Current Pay Period.
Last Pay Period.
Current Month.
Current Quarter.
Current Year.
Specified Date Range.

[Note: History Dates are taken from the Payroll History file.]

Reports’ Too= lbar

At the bottom of the Reports Preview screen there is t= he Reports Toolbar. Using this toolbar you can change the magnification of the display, print the report, export the report as a file or an email, or close the display. Note: The Reports feature of Micropay Reports uses a program called Crystal Reports™. Certain programs installed on your computer use different versions of Cryst= al Reports™, therefore the type of buttons and placement of the Reports Toolbar may be different on your computer than what is depicted.

Once a report has been generated, a preview screen app= ears displaying that report (figure 3). From this screen you may view, print, export or close the report.

Reports’ Too= lbar Buttons:

The Reports Toolbar has 6 tools as illustrated:

The table below describes the function of each of the = tools.

Move Ahead / Back 1 Page		The plain arrow buttons allow you to move through the displayed report one page at a time in the direction indicated. If the bu= tton is gray instead of black it indicates that you are at the end of the docu= ment and can proceed no further in the indicated direction.
Go To First/ Last Page		The arrow and bar buttons will display the first or = last page of the report without having to preview each page. If the button is = gray instead of black it indicates that you are at the end of the document and= can proceed no further in the indicated direction.
Printer		When this button is clicked, it will bring up the pr= int screen. The print screen displays the name of the printer being used and allows you to choose to print “All” the pages or a selected r= ange of them. The number of copies to be printed and optional collation of the output may also be selected. After making your choices, click the “OK” button to pr= int the report (Figure 4).
Printer Setup		This tool allows you to set certain printer specific parameters before printing. Note that you cannot change page orientation (landscape, portrait) for the predefined reports.
Export Button		Micropay Reports provides you with the ability to sa= ve the reports you generate in many different file formats including Excel, Word, and plain text.
Zoom Tool		This tool allows you to select the magnification of = the displayed report. This tool does not have any effect on the printed outpu= t.

A printer must be setup in order for you to print or v= iew any reports. Micropay Reports= uses the default printer that is setup for Microsoft Windows. In order to change the printer you= must do so through Microsoft Windows. Consult your Microsoft Windows manual on how to setup a printer. Note: Each report is predefined to print= in either Portrait or Landscape mode and cannot be changed to the other.

Export Screen

The Letter icon buttons provide the means of making a report accessible by other applications.&n= bsp; Clicking on this button will bring up the Export screen (figure 5).<= /p>

3D"Text <= ![endif]>

The Export screen has two options Format and Destination. The Format option allows you to save the report as different file formats: such as an Excel, Lotus or Quattro Pro spreadsheet formats, plain text, MS Word format, and others.

The Destination option allows = you to choose between exporting the report to a file or as an email. By default “Disk file”= is selected which will save the report to the specified file. Optionally you m= ay select “Microsoft Mail” to send the report to your e-mail application.

Exporting = to a File

3D"Text =
After selecting “Disk File” and clicking “OK” on the Export screen the Choose Export File dialog will be displayed. This screen lets you define where = the exported report will be saved. Select the appropriate Drive and Folder location for the file, and e= nter the desired filename. Make any changes and then click the “OK” button. The displayed report has now been exported to a file.

Exporting = to E-mail

3D"Text

After selecting “Microsoft Mail” and clicking “OK” = on the Export screen the Choose Profile dialog will be displayed. The “Choose Profile” screen will ask you to select a “Profile”. Consul= t your Microsoft Windows manual about changing the setting or select the default one. Click the “OK̶= 1; button once the desired file profile has been selected.

3D"Text

The Send Mail screen (Figure 8) will ask you to enter the information neede= d to send an email. Once you have finished filling out this screen, click “Send”.

Your report has now been sent as an email.

Utilities Menu

The Utilities menu, found on the Micropay Reports Selection screen, contains two options, Check Employee/History YTD Gross and Quick Lists.

Figure 9=

= ;

Check Employee/YTD Gross

Check Employee/History YTD Gross will display a report= with each Employee’s Year-to-Date Gross checked against their History Year-to-Date Gross (figure 10). If a difference between the two amounts is detected, it will be listed in the Difference column. Click the Print button to preview = this report. From the preview scre= en you can print this report.

Figure 10

Quick Lists

Quick Lists allows you to build simple reports or use queries for more complex reports. Selecting Quick lists brings up the Query Builder screen (figure 11)= .

Figure 11

How to Build a Report=

These are the steps needed to run a simple report on y= our payroll data:

1. Select a table

2. Select field(s) to displ= ay

3. Select Sort Order (optio= nal)

4. Create Selection Criteria (optional)

5. Run Query

1. At the top left of the page select Employee Tables, History Tables, or any other individual table. The report generated will use the = data from the selected table only.

2. Under “Select Fields to Show”, highligh= t the data fields you want displayed on your report by clicking on them. More than one field may be selecte= d. Items may be deselected by clicking on them a second time.

3. The “Sort By” field will sort the infor= mation on the report by the field selected. The order will be in ascending order. Click the arrow to the right and a= menu will appear displaying a list of fields to select from. Note: The sort field does not need= to be displayed on the report.

4. The bottom portion of the screen allows the user to determine which records are to be included in the report. A button is provi= ded which has a more user friendly interface for selecting some of the more commonly used selection criteria (such as hire date, department #, etc.). <= br> All fields available for display and sort order are available as selection criteria as well. To use any of these items, select it from the “Field Name” drop down list. Then select the operator you wish to use for co= mparison and the value to compare against. The Operator defines the type of comparis= on to be made between the data provided by the data field and the value you specify.

Operators

=3D ̶= 0;equal to”

> ̶= 0;greater than”

>=3D “greater th= an or equal to”

< ̶= 0;less than”

<=3D “less than = or equal to”

<><= span style=3D'mso-tab-count:1'> “not equal to”

Special Operators: Like and “<>“

Like - the Like = operator is used to compare strings such as names but not numeric values.

<> - Matches all values not equ= al to the value entered in the value field.

The Value is used in conjunction with the operator to = make a comparison. The Value informs= the query to include or exclude a set of values from the data provided by the selected data field. The “List Possible Values” button will generate a list of values considered appropriate for the data field selected. Click on the arrow = button to the right to see the full list. When those fields are filled in, click on either the “AND into criteria” or the “OR into criteria” button. If you are us= ing multiple criteria be certain to check that the ANDs and ORs are correct. For instance if you wish to select everyone in Departments 100 and 200 you must= use the OR function since no employee can belong to 2 different home department= s.

5. = Once the report has been built, click the “Run Query” button. This will bring up the Order Fields window (figure 12). Select the order you want the fields to be displayed on the report. Click “Done” when fini= shed.

Figure 12

For example, to generate a report that will list emplo= yee name and pay rate (salary or hourly): Under Select Fields to Show, click on Employee.[CSCName], (this field displays the employee’s full name), Employee.[SalaryRate], and Employee.[HourlyRate]. Under = Order By Field, click on the arrow to the right and select Employee.[LastName] fr= om the drop down menu; this will sort the report based on the employee’s last name. Then the click “Run Query” button.

Select the order the fields are to be displayed on the report. Fields arranged from = left to right with the topmost field being on the left side of the report. Double clicking on a field name in= the left column will move it from to the next position available in the right column. You may click the “All” button at any time; all remaini= ng field names will be moved over to the right column in their current order. Double clicking on a name in the right column will move that field name bac= k to the left.

Then click the “Done” button. The next screen will display the d= ata for the report. Click the “Print/Export” button to preview the printout (figure 13). The Previous and Next buttons allo= w you to move through the report page by page.&n= bsp; Zoom changes the displayed report magnification, and Print sends this report to your printer. The Close button closes the report display but does= not exit you from the Micropay Reports program.

Figure 13

Special Cases

Current Terminated Employees

You can run reports on current terminated employees, i= .e., in the year that they are terminated. Current terminated employees= will appear in the employee list on the Employees tab and the reports will conta= in employee information (see the following section). See the following section on the available reports.

Dropped Terminated Employees

Terminated employees are dropped from the employee lis= t at the beginning of a new year. = You will still be able to retrieve information about these employees. To access information, you will ne= ed their employee number. Enter = the employee number of the terminated employee on the Employees tab. Note the report will not contain t= he following employee information,

Employee Information=

Employee Name

Social Security Number

Department Number

Birth Date

Date Hired

Date Terminated

The report will contain the employee number. The following is a list of reports= you can run on terminated employees,

*Alpha Employee List

History Earnings by Employe= e

Deduction Report Summary

Unemployment Report

*Current terminated employees only.

Note: Sick-Vacation reports will still list current terminated employees’ name. No Sick-Vacation information will be listed on this report.